Products
Pipes, valves and fittings
The pipework is the part nobody ever sees and the part that decides whether the system runs without losses. We stock PVC pipe, 45 and 90 degree bends, couplings, sockets, male and female adapters, end caps and valves. These go in before the concrete and are not replaced afterwards.
What we carry in this category
Pimtas
Rigid PVC pipe
Pressure PVC pipe for the filtration runs.
- Material: PVC
- Ø 32, 50, 63, 75 and 90 mm
- PN 10
Pimtas
Flexible pipe
Flexible pipe for awkward runs and equipment connections.
- Rubber
- Ø 32, 50, 63, 75 and 90 mm
Pimtas
Check valve
Valve that allows flow in one direction only.
- Material: PVC
- Ø 32 to 90 mm
- PN 16
Pimtas
Check valve, tee body
Check valve with a tee shaped body.
- Material: PVC
- Ø 50 to 90 mm
- PN 16
Pimtas
Check valve with sight glass
Check valve with a sight glass so the flow can be seen.
- Material: PVC
- Ø 63 mm
- PN 16
Pimtas
Elbow 90°
90 degree PVC elbow for a change of direction.
- Material: PVC
- Ø 32 to 90 mm
- PN 16
Pimtas
Elbow 45°
45 degree PVC elbow for a gentler change of direction.
- Material: PVC
- Ø 32 to 90 mm
- PN 16
Pimtas
Y branch
Y shaped branch, with an easier path for the water.
- Material: PVC
- Ø 32 to 90 mm
- PN 16
Pimtas
Male and female adapter
Threaded adapter for going from pipe to equipment.
- Material: PVC
- Ø 32 to 90 mm
- PN 16
Pimtas
Reducer
Fitting that steps from one diameter to another.
- Material: PVC
- 50-32, 63-50, 75-63, 90-75 mm
Pimtas
Coupler
Coupler for joining two pipes of the same size.
- Material: PVC
- Ø 32 to 90 mm
- PN 16
Prices are not published. Press the button on a product and we send you the price on WhatsApp the same day. See them all in the shop
Why quality matters here
A joint that weeps inside the concrete cannot be repaired without breaking the shell. So pipework is not where you save: the parts are chosen for the working pressure and fitted before the pour.
Every extra bend adds resistance and makes the pump work harder. The shortest, straightest run from the plant room to the pool is also the cheapest one to run.
Common questions
What pipe diameter is used?
The diameter follows from the pump's flow rate. A pipe that is too narrow starves the pump and raises the electricity it uses.
Do you sell parts without installation?
Yes. Pipe, fittings and valves are sold separately, even if somebody else does the installation.
Other categories
Ask for a quote
Tell us where you are and what you have in mind. You get an answer with numbers in it, not adjectives.