Pool construction

Poured on site. Made for your garden.

Reinforced concrete pools, from the excavation and the pipework to balanced water.

The concrete shell of the riverside pool, during the work The riverside pool finished, with its infinity edge

The same riverside pool: the concrete shell, and the finished pool. See the project

The shape and the depth come from your garden, not from a catalogue.

We build reinforced concrete pools, poured on site. That means the shape and the depth come from your garden rather than from a catalogue. The work covers excavation, formwork, steel, pipework, the concrete pour, waterproofing, the final surface and the whole filtration system. A family pool usually takes six to ten weeks.

Three parts. One responsibility.

A pool is three things: the shell that holds the water, the system that keeps it clear, and the surface you actually see. We do all three, because when they are split between three contractors each one's problem becomes another one's fault.

  • A pool’s concrete shell, cast on site

    01

    The shell

    The shell that holds the water: concrete, steel, pipework and waterproofing.

  • A plant room with filters and pumps

    02

    The system

    The system that keeps the water clear: pump, filter and valves.

  • A finished pool in mosaic

    03

    The surface

    The surface you actually see: tile, mosaic or liner.

What’s included. All of the work, from the ground to the handover.

Ground and structure

  • Excavation and ground preparation
  • Timber formwork to the agreed shape
  • Tied steel mesh for the water load
  • A single concrete pour

Hydraulic system

  • Pipework, drains, skimmers and return inlets

Waterproofing and surface

  • Waterproofing
  • Surface: tile, mosaic or liner

Equipment and handover

  • Pump, filter, valves and lighting
  • Filling, water balancing and handover

This is the full scope as we describe it. Your quote prices every part separately, so you know what is in it and what is not.

The concrete shell of the riverside pool, before filling

Why concrete poured on site.

A ready-made shell arrives in one shape and one size. Concrete has no such limit: steps, a seat, an infinity edge or an awkward corner of the garden are all solved during construction. Concrete can also be repaired and resurfaced after twenty years, whereas a cracked shell gets replaced.

The cost of that is time. Concrete takes weeks, not days. If you need a pool within a fortnight we are not the right answer, and we will say so at the first meeting.

  • Concrete poured on site

    Concrete gives complete freedom in shape, depth and steps, and can be repaired many years later.

  • Ready-made shell

    A ready-made shell installs far faster but comes in fixed sizes.

How deep it should be.

Depth changes how a pool gets used more than any other decision.

Choose a depth

1.50 mOrdinary adult swimming

1.20 m
Children and standing
1.50 m
Ordinary adult swimming
2.00 m
Diving from the edge

Most family pools we build have a shallow end and a deeper end. If there are small children in the house, an even 1.20 m is safer than a sudden drop.

This selector is only an illustration. The final depth is settled after we measure on site and talk through how the pool will be used.

How we work. Seven steps, from measuring to the water.

  1. Measuring and the quote

    We come to the garden, measure and listen. You get a quote with every part priced separately, so you know what is in it and what is not.

  2. Excavation

    We mark out and dig. The ground decides the depth and the shape, not a catalogue.

    Construction on site.

    Digging and formwork, by our own team.

  3. Formwork and steel

    Timber formwork gives the exact shape. The steel mesh carries the weight of the water for decades.

    The timber formwork that gives the shell its shape
  4. Pipework

    Pipes, drains and returns go in before the concrete. After the concrete there is no going back.

    Pipes and drains set before the concrete is poured
  5. The pour

    The concrete goes in as one pour, so the shell has no cold joints.

    A pool’s concrete shell after the pour
  6. Waterproofing and surface

    After waterproofing comes the tile, mosaic or liner you see.

  7. System and handover

    We fit the pump, filter and lighting, fill, balance the water and show you how to keep it.

    A plant room with pumps, filters and pipework

Finished pools. Real projects, each with its own page.

Questions. About concrete pools.

How long does it take to build a swimming pool?

A family pool usually takes six to ten weeks, depending on the weather and the ground. You get a dated plan before we start, and we tell you when the weather changes that plan.

How much does a swimming pool cost?

We do not publish prices, because the price depends on size, depth, ground conditions, surface and the system you choose. Send us the dimensions you have in mind and we will come back with every part priced separately.

Concrete pool or fibreglass shell?

Concrete gives complete freedom in shape, depth and steps, and can be repaired many years later. A ready-made shell installs far faster but comes in fixed sizes. We build in concrete poured on site.

Do you build indoor pools?

Yes. With an indoor pool the waterproofing and the ventilation matter as much as the water, so they are planned from the start.

Where we work.

We build and service in Kosovo, Albania and North Macedonia. Our base is in Gjakova. Distance changes the schedule, not the standard.

Other services

Ask for a quote

Tell us where you are and what you have in mind. You get an answer with numbers in it, not adjectives.

Get a quote WhatsApp