01
The volume
The working rule in the industry is that the whole volume of the pool should pass through the filter several times in twenty-four hours.
Filtration systems
We design, install and service the pump, filter, valves and disinfection as one system.

We design, install and service the system that keeps the water clear: the pump, the filter, the valves, the filter media and the disinfection. We size the system to the volume of water rather than to what happens to be in the warehouse. We also fit systems to pools we did not build.
01
The working rule in the industry is that the whole volume of the pool should pass through the filter several times in twenty-four hours.
02
That gives the flow rate the pump has to deliver, and the flow rate gives the filter area.
03
A pump larger than the filter does not clean better; it just pushes water through the media too fast and burns electricity.
04
So the first question we ask is not 'which pump do you want', it is 'how many cubic metres does the pool hold'.
Water leaves the pool to be cleaned.
Water is drawn from the surface and from the floor.
The circulation pump, with its pre-filter, drives the water through the system.
Water passes through the media and returns clean.
UV deactivates micro-organisms that pass the lamp.
The cleaned water goes back into the pool.
A simplified diagram. The layout and the parts differ from one pool to the next.

01
Circulation pump with a pre-filter basket, Senkron or Kripsol
See in the shop: Senkron pump
02
Media filter, Waterfun Lamex from 50 to 90 cm, or a cartridge filter for small pools
See in the shop: Lamex sand filter
03
Multiport valve, or a digital valve with automatic backwash
See in the shop: Multiport valve


06
UV disinfection, which lowers the chemical load
See in the shop: Blue Lagoon Tech UV-C07
Electrical protection unit and timer
Quartz sand
The classic choice, cheaper to buy
Recycled glass
Filters finer, needs less backwashing and lasts longer
In the filters we fit today we increasingly use recycled glass. The saving is not in the price of the media, it is in the water and the time not spent backwashing.
Servicing
We service systems somebody else installed too. The parts that get replaced most often, such as valve gaskets, the pump basket, the pressure gauge and the filter media, we keep in stock.


We work out the water volume and look at the space in the plant room.
We choose a pump and a filter that match each other, not each one on its own.
We fit the pump, filter, valves, pipework and electrical protection.
We start the system, check the pressure and balance the water.
We show you the backwash and when to do it. Then we stay on for service.
From the water volume, not from the horsepower. Work out how many cubic metres the pool holds and how many times the water should pass through the filter in a day; that gives the flow you need. The filter is then chosen to handle that flow.
Filter sand is replaced after several years of use, because the grains lose their edge and filtration drops off. Recycled glass lasts longer. The practical sign is pressure that climbs again quickly after every backwash.
Yes, it lowers it, but it does not replace it entirely. UV deactivates micro-organisms that pass the lamp, while the water in the pool still needs a disinfectant residual.
Yes. That is a good part of our work: a pool built by somebody else, an undersized system, and water that never quite clears.
We build and service in Kosovo, Albania and North Macedonia. Our base is in Gjakova. Distance changes the schedule, not the standard.
Tell us where you are and what you have in mind. You get an answer with numbers in it, not adjectives.